ANI-F
Automatic Number Identification

 



ADVANTAGES

· Identifies radio callers
  & system abusers

·
Smallest ANI module
  in the industry

· Cost-effective

· 3 year warranty

 

FEATURES

· Available formats
  include: MDC-1200®,
  GE-Star®, DTMF,
  five-tone & two-tone

· Time-out timer &
  penalty timer

· Emergency ANI

· Programmable key-up
  delay

· Programmable via
  Midian's KL-3
  Programmer

DESCRIPTION

Midian Electronics' Automatic Number Identification (ANI) products enable the dispatcher or system administrator to monitor fleet communications and to identify and stop system abusers. When the user keys up their radio the ANI module transmits a tone sequence or a digital packet. This sequence or packet can then be displayed on Midian's CAD, DDU, ADD and TRC series display decoders.

Midian's Automatic Number Identification modules also offer Emergency ANI that can be hooked to a switch on the radio or a mercury tilt switch. When the switch is activated the ANI module will send a sequence with an emergency status digit attached. The display decoder will then show an alarm indication for that unit.

The ANI products also offer features such as key-up delay, time-out timer and penalty timer. The key-up delay holds the ANI sequence from being sent for a preprogrammed period of time to allow CTCSS to go out and raise the repeater. The time-out timer feature stops someone from talking too long and tying up the channel or eliminates stuck-mic conditions. The penalty timer prevents someone from keying up again for a predetermined period of time after the user has timed out.

The ANI-F can be flashed into any of the following formats: Motorola's MDC-1200®, Kenwood's FleetSync, Harris' G-Star (aka GE-Star), DTMF, 5-Tone (all formats), or 2-Tone (all formats).

 

APPLICATIONS

Automatic Number Identification products provide fleet management features that are beneficial to any radio fleet. This includes fleets such as taxi, towing and public safety.

 

INSTALLATION

Midian Electronics offers the smallest ANI products in the industry. Due to their small size, they can be installed into most any radio. Midian also offers plug-in ANI modules for many current OEM radios.

 

ANI-F Manual PDF icon (PDF File: 163KB)

 


MTSD-3
Tunable Two-Tone Sequential Decoder

 

ADVANTAGES

· Tunable two-tone
  decoder

·
Supports a wide
  frequency range

· Cost-effective

· 3 year warranty

 

FEATURES

· Momentary & latched
  outputs

· A version: 280 -
  1600 Hz

· B version: 500 -
  2800 Hz

· Frequencies are set
  using 2 tuning pots

DESCRIPTION

Midian's MTSD-3 is a tunable two-tone decoder. This product utilizes 2 tuning pots to set the two-tone frequencies. The MTSD-3 has a wide frequency range to accommodate most two-tone formats. The MTSD-3 can replace Communication Specialists' SD-1000 and Selectone's ST-200.

 

APPLICATIONS

 

The MTSD-3 is ideal for public safety, industrial, and commercial use. It can be used to activate emergency sirens or other equipment. Two of these can be used in parallel to decode 2+2 Aircraft Call.

 

INSTALLATION

 

Midian's MTSD-3 can be adapted to most any two-way radio system.

 

MTSD-3 Manual PDF icon (PDF File: 356KB)

 


PDE-1
Paging & Dialing Encoder

 



ADVANTAGES

· Encodes POCSAG,
  2-tone, 5-tone and
  DTMF in a single unit

·
Capacity of up to 155
  aliases

· 5 year warranty

· Cost-effective

 

FEATURES

· Offers up to 10
  different pager profiles

· 10 pre-canned
  messages available

· Allows a mix of
  different pager types
  in the same system

· Optional printer port
  available

DESCRIPTION

Midian's PDE-1 is a desktop paging encoder for POCSAG, 2-tone, 5-tone, DTMF, and Pulse Tone. The PDE-1 can transmit POCSAG at 512, 1200, or 2400 baud and offers up to 10 pre-canned messages. 2-tone formats include Motorola's Quick Call II™ Reach, GE Type 99, and Aviation Call. Plectron can also be achieved by using Any 2-tone feature that allows for any 2-tones between 300-3000 Hz to be encoded. Pulse Tone is supported with 1500 Hz and 2805 Hz dialing for HEAR systems. The dispatcher can enter up to 155 users aliases and associate 10 of the 155 aliases with the speed dial function.

 

APPLICATIONS

 

Midian's PDE-1 is ideal for paging virtually any tone and POCSAG pagers for hospitals, campuses, retailers, industrial users or for testing pagers. The PDE-1 can be used to replace the discontinued PE-1000 by Communications Specialists (Comm Spec or CSI).

 

INSTALLATION

 

The PDE-1 can be fitted to most any transmitter or base station.

 

 

PDE-1 Manual PDF icon (PDF File: 772KB)

 


PLECTRON OPTION
Plectron Option for UD/UE/UED & PR-1 Products

 

ADVANTAGES

· Allows encoding and
  decoding of Plectron
  tones

·
Enables long A or long
  B for Motorola Group
  Call

FEATURES

· Available on any UD,
  UE, UED or PR-1
  product

· 3 decode addresses
  for selective calling

DESCRIPTION

The Plectron option can be added to any of Midian's UE, UD, UED, or PR-1 series products. This option adds the capability for Plectron tones as well as group call for Motorola's Quick Call 2®.

 

APPLICATIONS

The Plectron option adds Plectron tones and Motorola Group Call to the UD/UE/UED and PR-1 series products.

 

INSTALLATION

 

This option is added to a UD/UE/UED or PR-1 series product at the factory.

 

PLECTRON OPTION Manual PDF icon (PDF File: 57KB)

 


PR-10
Store and Forward Repeater Maker and Paging Regenerator

 

 

ADVANTAGES

· Low cost alternative
  for expanding radio
  coverage

·
Existing licenses can
  be used

· 3 year warranty

 

FEATURES

· Up to 180 seconds of
  record time for
  message playback

· COR or VOX
  operation

· Supports 2-Tone,
  DTMF, 5-Tone and
  Pulse Tone decoding
  for validating and
  regenerating pages

DESCRIPTION

Midian's PR-10 is a simplex store and forward repeater (aka simplexor or parrot) and paging regenerator that supports regeneration of both tone and voice similar to the discontinued Zetron Model 19.

 

Simplex Repeater Mode:

 

The PR-10 can be connected to a simplex mobile or base station to create a simplex store and forward repeater. When the PR-10 sees a busy indication from the connected radio it will start recording the received audio. When the busy indication goes away for a programmed amount of time, the PR-10 will key the radio and retransmit the recorded audio. The following are applications for the PR-10 as a simplex repeater:

• Expand radio coverage into remote locations, tunnels, buildings (hospitals, campuses, etc), downtown areas and more.

• Evaluate potential radio site or coverage problems by connecting the PR-10 to a mobile radio. A technician can then drive through the desired coverage area, key up and transmit voice, unkey and listen to the repeated audio quality.

Selective Repeat Mode:


The PR-10 has a tone decoder on the board that can be programmed to decode 2-Tone, DTMF, 5-Tone or Pulse Tone (1500 Hz or 2805 Hz for HEAR Systems). When the tone decoder decodes the programmed sequence(s) it will give a validate output to the PR-10. The validate confirms to the PR-10 that the PR-10 should repeat the incoming audio. The tones will also be regenerated. The following are applications for the PR-10 as a selective simplex repeater:

• Regenerate 2-tone or DTMF pages for fire departments into remote areas or buildings with poor coverage.

• Regenerate Pulse Tone pages from ambulances in remote areas with poor coverage to hospitals (HEAR Systems).

Announcement Mode:


The PR-10 can be programmed to repeat the last received audio message continuously at programmable intervals, applications include:

• Broadcasts for road or weather conditions

• Aviation authority broadcasts for pilot information (ATIS – Automatic Terminal Information Service)

 

APPLICATIONS

 

Midian's PR-10 is ideal for extending coverage into areas with poor reception, evaluating potential repeater sites and continuously re-broadcasting voice messages.

 

INSTALLATION

 

The PR-10 can easily be connected to many mobile radios using the rear accessory connector. Midian also offers a number of pre-made cables for many popular radios.

 

PR-10 Manual PDF icon (PDF File: 839KB)

 


RT-2
Keypad Programmable Two-Tone Decoder

 



ADVANTAGES

· Field programmable

·
Wide frequency range

· Momentary, latched,
  & call lamp outputs

· 3 year warranty

 

FEATURES

· Decodes up to 3
  two-tone sequences

· Frequency range from
  300 - 3000 Hz

· Can encode from a
  keypad & ANI, &
  transpond in DTMF

· Programmable using a
  12-button keypad

DESCRIPTION

Midian's RT-2 is a keypad programmable two-tone sequential decoder that is capable of decoding up to 3 different two-tone sequences. The RT-2 can replace the SD-1000 by Communication Specialists and the ST-200 by Selectone.

 

APPLICATIONS

The RT-2 is ideal for public safety, industrial, and commercial use. It can be used to activate emergency sirens or other equipment.

 

INSTALLATION

 

 

Midian's RT-2 can be adapted to most any two-way radio system.

 

RT-2 Manual PDF icon (PDF File: 330KB)

 


UD-1B
2-Tone, 5-Tone, DTMF & Pulse Tone Decoder
with ANI



ADVANTAGES

· Sends ANI &
  transponds in DTMF,
  two-tone, five-tone or
  pulse tone

·
Offers momentary,
  latched & call lamp
  lamp outputs

· 3 year warranty

 

FEATURES

· 3 decode addresses
  for selective calling

· Deadbeat Disable for
  lost, stolen or non-
  paying units

· Programmable time-
  out timer & key-up
  delay

· CTCSS during transmit

DESCRIPTION

Midian’s UD-1B offers decode, transpond and ANI for DTMF, five-tone, pulse tone and two-tone. The UD-1B offers multiple decode addresses for selective calling and functions such as Deadbeat Disable. The UD-1B offers momentary, latched, and call lamp outputs. Other features include Emergency ANI, CTCSS encode, and time-out timer.

 

APPLICATIONS

 

The UD-1B can be used in fleets (taxi, public safety, towing, etc) for selective calling and ANI in five-tone. The UD-1B can decode pulse tone for HEAR systems and two-tone for activating emergency systems or for two-tone paging.

 

INSTALLATION

 

The UD-1B can be installed into most two-way radios. Midian offers plug-in versions of this product for Icom and Maxon radios.

 

UD-1B Manual PDF icon (PDF File: 318KB)

 

UD-1B DMH
Dashmount 2-Tone, 5-Tone, DTMF & Pulse Tone Decoder
with ANI

 

ADVANTAGES

· Decodes DTMF, two-
  tone, five-tone or
  pulse tone

·
Sends ANI &
  transponds in DTMF,
  two-tone, five-tone or
  pulse tone

· Offers momentary,
  latched & call lamp
  outputs

· Enclosed in a durable
  dashmount box

· 3 year warranty

 

FEATURES

· 3 decode addresses
  for selective calling

· Deadbeat Disable for
  lost, stolen or non-
  paying units

· Programmable time-
  out timer & key-up
  delay

· CTCSS during
  transmit

DESCRIPTION

Midian’s UD-1B DMH Series offers decode, transpond and ANI for DTMF, five-tone, pulse tone and two-tone. The UD-1B DMH offers multiple decode addresses for selective calling and functions such as Deadbeat Disable. The UD-1B DMH offers momentary, latched, and call lamp outputs. Other features include Emergency ANI, CTCSS encode, penalty timer, and time-out timer.

 

APPLICATIONS

 

The UD-1B DMH can be used in fleets (taxi, public safety, towing, etc) for selective calling and ANI in DTMF and five-tone. The UD-1B DMH can decode 1500 and 2805 Hz pulse tone for HEAR systems and two-tone for activating emergency systems or for two-tone paging.

 

INSTALLATION

 

Midian's UD-1B DMH can be adapted to most any two-way radio. This unit is supplied with a mounting bracket for installation in vehicles or other locations.

 

UD-1B Manual PDF icon (PDF File: 676KB)

 


UE-1
2-Tone, 5-Tone, DTMF & Pulse Tone Dial Encoder
with ANI

 



ADVANTAGES

· Encodes DTMF, two-
  tone, five-tone or
  pulse tone from a
  keypad

·
Sends ANI in DTMF,
  two-tone, five-tone or
  pulse tone

· Cost-effective

· 3 year warranty

 

FEATURES

· 10 number memory
  dial

· DTMF hot dialing

· Emergency ANI

· Programmable time-
  out timer & key-up
  delay

· CTCSS during
  transmit

DESCRIPTION

Midian’s UE-1 offers keypad dialing and ANI encode. The UE-1 can encode in DTMF, five-tone, pulse tone, and two-tone. It also features time-out timer, CTCSS encode and more.

 

APPLICATIONS

 

The UE-1 can be used for selectively calling in DTMF or five-tone. It is also ideal for pulse tone dialing for HEAR systems. The UE-1 can also encode two-tone for activating two-tone decoders for paging or sirens.

 

INSTALLATION

 

The UE-1 can be installed into most two-way radios.

 

UE-1 Manual PDF icon (PDF File: 273KB)

 


UED-1B
2-Tone, 5-Tone, DTMF & Pulse Tone Decoder
with Dial Encode & ANI

 



ADVANTAGES

· Encodes from keypad,
  ANI & transpond in
  DTMF, two-tone, five-
  tone or pulse tone

·
Decodes DTMF, two-
  tone, five-tone or
  pulse tone

· Offers momentary,
  latched & call lamp
  outputs

· 3 year warranty

 

FEATURES

· 10 number memory
  dial

· 3 decode addresses
  for selective calling

· Deadbeat Disable for
  lost, stolen or non-
  paying units

· Programmable time-
  out timer & key-up
  delay

· Can be used with
  Midian's Backlit
  Keypad

DESCRIPTION

Midian’s UED-1B offers keypad encode, decode, transpond and ANI for DTMF, five-tone, pulse-tone and two-tone. The UED-1B offers multiple decode addresses for selective calling and functions such as Deadbeat Disable. The UED-1B offers momentary, latched, and call lamp outputs. The optional keypad enables memory dialing, DTMF hot dialing, and selective calling. Other features include Emergency ANI, CTCSS encode, penalty timer, and time-out timer.

 

APPLICATIONS

 

The UED-1B can be used in fleets (taxi, public safety, towing, etc) for selective calling and ANI in DTMF and five-tone. The UED-1B can encode and decode pulse tone for HEAR systems and two-tone for activating emergency systems or for two-tone paging.

 

INSTALLATION

 

The UED-1B can be installed into most two-way radios.

 

UED-1B Manual PDF icon (PDF File: 318KB)

 


UED-1B BEZEL
2-Tone, 5-Tone, DTMF & Pulse Tone Dial Encoder
with Decode & ANI

 



ADVANTAGES

· Encodes from keypad,
  ANI & transpond in
  DTMF, two-tone, five-
  tone or pulse tone

·
Offers momentary,
  latched & call lamp
  outputs

· Packaged in a
  mountable keypad
  bezel

· 3 year warranty

 

FEATURES

· 10 number memory
  dial

· 3 decode addresses
  for selective calling

· Deadbeat Disable for
  lost, stolen or non-
  paying units

· Programmable time-
  out timer & key-up
  delay

DESCRIPTION

Midian’s UED-1B BEZEL offers keypad encode, decode, transpond and ANI for DTMF, five-tone, pulse tone and two-tone. The UED-1B BEZEL offers multiple decode addresses for selective calling and functions such as Deadbeat Disable. The UED-1B BEZEL offers momentary, latched, and call lamp outputs. The backlit keypad enables memory dialing, DTMF hot dialing, and selective calling. Other features include Emergency ANI, CTCSS encode, penalty timer, and time-out timer.

 

APPLICATIONS

 

The UED-1B BEZEL can be used in fleets (taxi, public safety, towing, etc) for selective calling and ANI in DTMF and five-tone. The UED-1B BEZEL can encode and decode 2805 and 1500 Hz pulse tone for HEAR systems and two-tone for activating emergency systems or for two-tone paging.

 

INSTALLATION

 

The UED-1B BEZEL can be installed into most two-way radios.

 

UED-1B BEZEL Manual PDF icon (PDF File: 496KB)

 


UED-1B DMV
Dashmount 2-Tone, 5-Tone, DTMF & Pulse Tone Decoder
with Dial Encoder & ANI

 



 

ADVANTAGES

· Encodes from keypad,
  ANI & transpond in
  DTMF, two-tone, five-
  tone or pulse tone

·
Decodes DTMF, two-
  tone, five-tone or
  pulse tone

· Offers momentary,
  latched & call lamp
  outputs

· Durable enclosure
  features backlit
  keypad

· 3 year warranty

 

FEATURES

· 10 number memory
  dial

· 3 decode addresses
  for selective calling

· Deadbeat Disable for
  lost, stolen or non-
  paying units

· Programmable time-
  out timer & key-up
  delay

DESCRIPTION

Midian’s UED-1B BEZEL offers keypad encode, decode, transpond and ANI for DTMF, five-tone, pulse tone and two-tone. The UED-1B BEZEL offers multiple decode addresses for selective calling and functions such as Deadbeat Disable. The UED-1B BEZEL offers momentary, latched, and call lamp outputs. The backlit keypad enables memory dialing, DTMF hot dialing, and selective calling. Other features include Emergency ANI, CTCSS encode, penalty timer, and time-out timer.

 

APPLICATIONS

 

The UED-1B BEZEL can be used in fleets (taxi, public safety, towing, etc) for selective calling and ANI in DTMF and five-tone. The UED-1B BEZEL can encode and decode 2805 and 1500 Hz pulse tone for HEAR systems and two-tone for activating emergency systems or for two-tone paging.

 

INSTALLATION

 

The UED-1B BEZEL can be installed into most two-way radios.

 

UED-1B DMV Manual PDF icon (PDF File: 415KB)